DLS 355

Handheld Dual Laser Light Source

Compact device utilising a DLS 355 dual LED source for accurate measurements.

Part No: DLS 355

Share this product

The DLS 355 dual laser source allows stabilized power levels for accurate loss measurements on single mode systems. Technicians can utilize each of the wavelengths included in this light source to reference and test with RP 4XX series optical power meters and gather measurements to meet international standards.

The DLS 355 provides a 2 kHz tone output which is recognized by the RP 4XX series power meters; the incoming 2 kHz signal is identified and an audible alert is provided by the power meter. This 2kHz signal will also allow fiber identification when used with non-invasive fiber identifier devices, such as the LFI 110.

The dual laser source comes with a female SC adapter to allow connection to test jumpers and fiber under test. Easy removal of the adapter means that the light source ferrule can be cleaned to prevent contamination of test jumpers. Additional adapters are available.

  • 1310 nm & 1550 nm Wavelengths
  • NIST Traceable Measurements
  • 2 kHz Tone Output
  • Universal Connector Interface Compatible with SC, FC, ST, & LC
  • Long Battery Life
Wavelengths 1310 nm, 1550 nm
Optical Interface Universal Connector (SC / FC / ST / LC)
Tone Identification 2 kHz Incoming Signal - Audible AlertPower OnPus
Power On Push Button ON / Auto-Off
Output Power -5 dBm
Output Stability ± 0.05 dB (1 Hour), ± 0.03 dB Long-Term (15 min. Warm-Up)
Spectral Width 5 nm / 5 nm
Laser Class Class 1 (FDA 21 CFR 1040.11)
Battery Type CR2
Operating Temperature -10° to +50° C
Storage Temperature -30° to +60° C
Tool Case Included Yes
Dimensions 6.1″ x 0.94″ x 0.75″ (15.5 x 2.38 x 1.9 cm)
Weight 3.0 oz (85.4 g)